GMC Truck Forum banner

2000 silverado high 6 mod?

Question 
18K views 5 replies 3 participants last post by  00LWRDR 
#1 ·
hi guys,
i have been trying to figure out how to do a high 6 conversion on my 2000 silverado ext cab 2wd 5.3l,:think:

i allready custom did a high 4 kit that works really good, but i want to add the fogs in as well, i know for shure if all else fails i can just add a relay harness similiar to the ones used for HID'S but i was wondering if there is a way to use diodes and jump around in the fuse box?

thanks so much in advance!
 
#2 ·
http://www.gmfullsize.com/forum/showthread.php?t=143753 found via http://www.gmfullsize.com/forum/sea...9998:934euu-kldl&cof=FORID:9&q=6hi&sa=Go#1440

http://www.gmfullsize.com/forum/showthread.php?t=67173
Look in the underhood fusebox. Go by the diagram on the underside of the box cover; don't go by the printing on the relays, as half of mine were installed backwards (which is okay for these particular relays, but not helpful for this hack).
Connect 86 on the HL relay to 86 on the Fog relay. Keep the Fog relay in place.
In that thread, I also said how to run the DRLs at the same time. 8hi.
 
#6 ·
thanks alot guys, i did this with my truck with my own modifications, i did my DRLS and all so its a high 8, my fogs are triggered off my drls, my drls are still drl's, (there really cool LED'S like 6000k color) and then my DRL'S get power from my headlight relay since my lows are HID'S with seperate relays, and the DRLS only draw 1w so it should be fine.

thanks for the help
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top